Fence Installation in Parker, TX
We build long fence runs for homeowners in Parker, Allen, and Murphy.
Parker's Fence Code
Parker is not Plano or Frisco. The city writes its own fence rules, and they start from a different premise than anything else in Collin County.
Fences top out at 6 feet, not 8. Every panel must be at least 50 percent open construction, meaning half the surface lets you see through it. Solid cedar board on board, the fence most of our cities ask for, is not the default here. It is the exception, allowed only along three named roads and around pools.
We check your lot against Parker's code before we quote a single board. The build permit, the height, the panel style, and the inspection at the end all get sorted before the crew loads a truck.
- The whole run gets measured on the ground, not off a map.
- The grade gets walked with you, because the ground out here rises and falls.
- You'll have the schedule before we start, not after.
- Send a message during business hours and you'll hear back inside half an hour.
What Installation Covers
A Parker fence job usually means a tear out and rebuild across a lot that dwarfs the average subdivision yard. Two acres with 200 feet of frontage is the minimum here. One line of fence can run several times the length of anything we build in Allen or Murphy before you count a gate.
- Ornamental iron on the open stretches, which satisfies Parker's open construction rule and marks the line without blocking the view.
- Cedar picket spaced for airflow, where you want cedar's warmth and still meet the 50 percent open requirement.
- A solid cedar run around a pool or along Parker Road, Dillehay Drive, or Hogge Drive, the three roads where the city allows it.
- Pre-stained boards on whatever cedar goes up, so both faces have color the day the fence is finished.
- Board on board on the solid stretches where it is permitted.
Fencing on Large Lots
A subdivision fence is 150 to 200 linear feet. A Parker fence can be three or four times that. The job doesn't just get bigger. It changes shape.
Measuring Long Fence Runs
Most homeowners guess low on their own fence line. On acreage the guess is usually well off. The far side of the property is not somewhere you walk often, and the corner stakes may be buried in grass.
We measure the whole run before we quote it. The material order comes off that number, and on a job this size, being off by 40 feet is real money. Getting it right at the start is what keeps the schedule honest.
Staging Cedar and Steel on Open Ground
A run this long is a serious pile of cedar, steel, and concrete. It does not fit in a driveway and there may not be a driveway near the far stretch.
We work out where the material can be set down before it gets ordered. On an acreage lot the staging point is often out on the property itself, along the fence line. Stock gets placed where the crew can reach it without carrying boards across open ground.
You get a text when material is scheduled, and another the day before. Whatever is left over goes with us, along with the old fence.
Keeping the Line Straight
Over twenty feet, a small error hides. Over three hundred, your eye catches it from the road. A long fence is judged from a distance, and that is the hardest test there is.
The line gets set before any concrete goes in. We pull the run, set the ends, and work the posts to it. Getting that right at the start is why the finished fence reads straight from across the property.
Grade Changes on Long Runs
Acreage does not get graded the way a subdivision pad does. A Parker run crosses dips, rises, and the odd drainage line, and the fence has to answer every one of them.
The fence can follow the ground and stay parallel to it. Or it can step down in sections, keeping every panel level. Which one suits your run depends on how much the ground moves and how the property reads from the house. We decide that with you on the walk through, before the first post goes in.
Posts and Foundation on Parker Lots
On a two-acre lot with nothing between your fence and the horizon, the buried half is the whole ball game. Nothing out here breaks the wind. No row of houses, no tree line, no adjacent building. The fence takes the full push on every gust.
- Posts go 3 feet into the ground, which is double what most codes ask for.
- Posts are heavy duty galvanized steel, coated so rust never gets started.
- Posts sit 6 feet apart, not the 8 feet the industry treats as standard. Parker's own column spacing rule calls for 6 feet center to center, which is exactly where we set them everywhere we work.
- A kicker board runs the base, so no board sits on damp dirt.
That spacing matters more on a long open run than it does on a 60 foot back yard. When the wind hits 300 feet of fence at once, every post shares the load with its neighbors. Wider spacing puts more load on fewer posts, and on an exposed lot that is how runs go over.
Where Solid Fencing Is Allowed in Parker
Parker requires open construction on most of the city. But three roads are named exceptions: Parker Road, Dillehay Drive, and Hogge Drive. A lot fronting one of those roads can carry solid cedar along the roadway.
Pool enclosures are the other exception. A solid fence is permitted within 30 feet of a pool, with the finished side facing out. On most Parker properties, the pool area is the whole reason a solid fence exists.
Everywhere else, the fence has to let at least half the view through. Ornamental iron does that naturally. Spaced cedar pickets do it too, and they give you the warmth of wood with the airflow the code asks for.
How a Parker Fence Installation Runs
- Call or message us, and we'll come walk the whole line with you.
- We measure the run, check your lot against Parker's fence code, and work out where material can be staged on the property.
- Get your estimate, with the build and the permit spelled out.
- We pull the building permit and call ahead so the buried lines get marked before anyone digs.
- Demo first, then the line gets set, then posts, framing, boards, and your cap.
- Parker inspects the finished fence, and we handle that scheduling.
What Customers Say
1–3 of 9
Very responsive and fixed my fence issue professionally and quickly. Excellent communication and workmanship. Highly recommended!
My Mom and Dad found Mom’s Fence Man they were so pleased with their quality workmanship on their new fence and I was so happy to hear how they had such a great experience. I also had a beautiful new gate with fence built and most recently a new beautiful shared backyard fence. They went above and beyond communicating from the beginning with several easy to understand quotes to updates through the materials arriving and updates of their arrival on the day of work. Throughout the process from the beginning up to the building of my new fence I was able to continue my daily work and scheduled appointments with no interruptions and have peace of mind.
He did a great job, was very communicative and easy to work with! Highly recommend!
I can’t thank Bill, Yvette and the rest of the team at Mom’ Fence Man for their dedication and hard work with replacing my 21yr old fence. From the design process to the demo and installation, the entire process and project were handled with the utmost care and dedication to excellence. I would highly recommend Mom’s Fence Man to anyone looking to install or replace their fence. Thank you Bill, Yvette and the rest of the team for bringing my dream to life! I can’t thank you enough! :) Tracy Marshall #momsfenceman #customerservice #amazing #teamwork #trustedpartner #excellence #expertcraftsmanship
Bill came out and fixed the issues I had. He is so helpful and kind. I love working with this company
My experience with Mom’s Fence Man in replacing my old 6’ fence with a beautifully crafted 8’ fence was 100% positive. The communication was excellent from start to finish. I always knew what to expect and the timelines given were accurate so I was able to plan my time accordingly. Bill helped with the design options and I couldn’t be happier with the results. Home repairs and improvements have always been something I dread, but this experience showed me that doesn’t have to be the case if you have the right company. I highly recommend them.
Bill and his team were very professional, easy to work with, and provided great guidance throughout the process. They did an excellent job with our fence replacement and repairs, and we’re very happy with the results. Highly recommend Bill and his team!
Fantastic work! Yvette and crew took great care in removing and replacing our fence. They took their time and did it right. We are thrilled with the final product and give Mom's Fence Man our highest recommendation.
When I called Bill he answered the phone and we made an appointment to get an estimate to repair my fence. He showed up on time and provided a reasonable estimate. Two weeks later as scheduled his reliable and professional crew arrived on time and completed my repairs the same day to my satisfaction. He was very nice and honest to work with. If I need more repairs in the future I will call him. I recommend you at least call for an estimate and I think you will be pleased! (I had called another company after I spoke to Bill to get a second estimate and to this day they never returned my call. That he answered my call impressed me a lot!)
Frequently Asked Questions
Why is Parker's height limit 6 feet instead of 8?
Parker's fence code caps side and back yard fences at 6 feet. It is lower than Plano, Frisco, or McKinney. The city wrote its own ordinance for its own lot character, and the height limit is part of it. We build to 6 feet here, and it is enough to define a line on acreage where the distance does most of the screening.
What does open construction mean for my fence?
Parker requires that at least 50 percent of each panel surface provides an unobstructed view. That rules out solid board on board as the default. Ornamental iron, spaced pickets, and similar styles all satisfy the rule. We match the style to the stretch and make sure the whole run passes inspection.
Can I build a solid privacy fence anywhere in Parker?
Along Parker Road, Dillehay Drive, or Hogge Drive, yes. Around a pool within 30 feet, yes. Everywhere else the 50 percent open rule applies. We sort that out on the walk through so you know which stretches get solid cedar and which ones need an open style.
Does Parker require a fence permit and inspection?
Yes to both. A building permit is required before construction starts, and the finished fence must pass a city inspection. We pull the permit and schedule the inspection. You do not have to deal with either one.
How long does a fence job take on a two-acre lot?
Longer than a subdivision yard. Two to three days is typical for the stretch near the house. A full perimeter run on acreage goes past that, because there is simply more fence to build. You get the schedule before we start, not as a surprise on day three.
Get Your Parker Fence Line Measured
Tell us where the line runs and we'll come walk all of it.